testesestestestest
Solutions for tubes | fittings | boilers
 

Elbows and fittings

The right solution for every project

Elbow pipes

Elbow pipes

Making up around 50% of our turnover, the Uhlig elbow pipe remains to this day a key element of our manufacturing operation. As required, Uhlig also produces the world's largest shell elbow, a full 2,600mm (103 inches) in diameter! As with all other sizes, Uhlig manufactures these elbow pipes from two half-shells, thus giving them much better flow characteristics. When it comes to large elbow diameters and special thicknesses of pipe wall, our strength lies in producing the smallest of radii (as little as 1 x D).

 

Variations

Typically with longitudinal seam welds, Uhlig elbows are supplied as follows:

  • In ferritic, austenitic and high alloy materials
  • Cold or hot formed
  • With an external diameter of 219mm (8”) to 2600mm (103”)
  • With a radius of 203 to 3300mm
  • With a wall thickness of 3 to 80mm
  • With or without surface treatment
  • And at any desired angle

Extrusions and T-pieces

Extrusions and T-pieces

Uhlig makes extrusions and T-pieces in 5 different production variants:

 

  • Extruded from pipes (e.g. accumulators for the gas industry)
  • Extruded with two longitudinal seams
  • Extruded with one longitudinal seam
  • Pressed from two half-shells
  • Made from piping (pipe sections) with a welded-on outlet
  • All complemented by Y-pieces, cross pieces and similar / special constructions

Caps (ellipsoidal and torispherical heads)

Caps (ellipsoidal and torispherical heads)

Our production work for you can on request also include end working jobs

We offer the following manufacturing options in the area of end elements:

  • Dimensions: diameter from 114.3 mm to 1420 mmOther sizes on request
  • Materials: steels, stainless steels, duplex / super duplex steels, CuNi steels
  • Most important product standards: DIN 28011/DIN 28013, ANSI B 16.9 excl. clauses 2.2 and 9

Reducers and adapters

Reducers and adapters

We make reducers in welded design with and without cylindrical ends

  • In concentric and eccentric shape
  • Plus additional adapters

Manufacturing options

  • Dimensions: diameter of DN 400 to DN 1800, wall thickness of 4.0 to 50.0 mm
  • Materials: steels, stainless steels, duplex steels, CuNi steels, aluminium steels, titanium, Ni steels
  • Most important product standards: DIN, EN, ASME

Custom components

Custom components

We are an adept partner in diverse areas

Specially made products:

  • Pipes
  • Accumulators
  • Custom constructions
  • Spools
  • Prefabrication of pipeline components

Manufacturing options

  • Dimensions: diameter of DN 400 to DN 1800, wall thickness of 4.0 to 50.0 mm
  • Materials: steels, stainless steels, duplex steels, CuNi steels, aluminium steels, titanium, Ni steels
  • Most important product standards: DIN, EN, ASME

 

Additional custom products possible on request. Please speak to us.